When using a printing device with a Windows PC, the user may encounter the error. HP Printer Have Paper But Says Out Of Paper According to a layperson, the obvious cause is that you’ve ran out of paper and need to refill the paper tray to continue using your printer. However, whether or not a user is out of paper, he may receive such an error message. The user may grow tired as he ponders why he is seeing this error notice in such circumstances. The first thing I’d say is don’t panic; the problem is rather common, and we can swiftly resolve it by implementing basic security measures. I’ll go over a few options for dealing with the Printer Out of Paper Error in this post.
How to Resolve the HP Printer Out of Paper Issue
While printing, you receive an HP Printer Have Paper But Says Out Of Paper error notice. It can occur due to a multitude of factors. We’ll go over some of the most basic and effective methods in this article, which need very little technical knowledge and can be done by anyone. If you want to tackle this problem as quickly as possible, you must accomplish the task using the permanent ways.
Step 1: Checking the condition of Papers and reloading them
You must inspect the type and condition of the papers in this step, as these criteria influence how the printer selects paper. Because of the moisture that the paper has absorbed, the edges of low-quality papers may curl or raise the sheet. As a result, the paper is unable to be fed into the printer. To inspect and reload the paper, repeat the process.
- To begin, remove the paper from the paper tray and inspect it to verify that it is not bent, torn, or damaged. Also, double-check that you’re using the same paper size and type.
- Tap on a level surface to align the edges of the paper stack.
- To make a stack, use at least 10 and no more than 25 plain pages.
- Now correctly place the paper in the paper tray.
- After that, begin the printing process. If the problem persists, try loading alternative brands and types of paper and printing a document again.
- If the problem persists, proceed to the next step.
Step 2: Make sure the rollers are clean.
Paper feed difficulties can also be caused by the presence of dust, paper fiber, and other material on the pick rollers. At bladnews you can find troubleshooting of HP Printer Have Paper But Says Out Of Paper Error. So, follow the instructions below to clean the rollers.
- Turn the printer off and wait for it to become idle and silent.
- Disconnect the printer’s power cable now.
- To gain access to the pick rollers, open the printer’s access door.
- In distilled water, softly dampen a piece of link-free cloth. Neither tap water nor alcohol should be used.
- Now, using the cloth, wipe the rollers by rotating them upward with your fingertips. Remove all of the dust in a clean manner.
- Then close the access door and plug in your printer’s power cord.
- Restart your HP printer and attempt printing once more. Try the next step if the HP Printer Error Out of Paper has not been resolved.
Step 3: Resetting the Printer
- Remove the power cord from your HP printer without turning it off.
- Wait a few moments before reconnecting the power cable to your HP printer.
- Now, hit the power button on your HP printer to turn it on.
- Now print a test file to ensure that the HP Printer Error Out of Paper has been resolved.
Conclusion
In this post, we looked at what produces the Printer Out of Paper error message. What does it indicate when you get an error message? By completing all of these steps, you may completely eliminate the HP printer out of paper error. All of these steps are really helpful in resolving this problem. If you’re still having issues, you can get immediate printer help from online technical experts.
References: HP Printer Say Out of Paper Error
