Home » How to Repair a Hard Drive’s Bad Sectors

How to Repair a Hard Drive’s Bad Sectors

by Nowdatarecovery
Data recovery services for Seagate hard discs.

Natural wear and tear eventually causes computer owners to replace some of the components they’ve invested in over the years. Despite this, many consumers still assume that their computers will survive for decades. One of the most common causes of data corruption on computer hard drives is physical damage or malfunctioning software. There are methods to extend the life of your computer’s hardware, but if you see an error notice regarding faulty sectors on the disc, it’s typically a sign that the end is just beginning.

If the situation looks grim, there is a possibility to patch damaged sectors and prevent the loss of all of your data from the failing hard drive. There is just one issue remaining: when should a rescue operation take place vs when should the drive end?

Identifying and Correcting Problem Areas based on their Type

First, understand what sort of faulty sector you’re dealing with before trying to repair a drive with bad sectors. Physical (hard) bad sectors and logical (soft) bad sectors are also conceivable. At first, it may seem that this procedure is superfluous, since faulty sectors will always result in data recovery center loss and worse performance on the afflicted disc, regardless of their kind. It’s important to know what kind of defective sector you have, however, since one kind can be repaired while the other is irreparable.

Aspects That Aren’t Good

Physical bad sectors are caused by physical damage to the hard disc in question. There is always one sign that clearly shows a case of physical bad sectors, and that is the weird sounds emanating from the hardware, even though many factors may cause physical damage – such extreme heat, dust, blunt force, and even natural wear and tear.

The drive is irreparable and may fail you at any time if you experience this symptom, which is often accompanied by other symptoms like a slow system and the appearance of various error messages. If you experience this symptom, you should back up your important data as soon as possible to another drive or cloud storage. Only by replacing the whole disc can a physically defective section be remedied, in other words

Sectors that are logically bad

Logical bad sectors nevertheless suggest that whatever data is saved in that specific sector is certainly gone for good, even though it sounds less terrible than physical harm Since the harm isn’t genuinely tangible, it can be fixed. The fact that both Windows and macOS have built-in solutions to deal with this kind of problem only Server Data Recovery to further improve the situation.

Right-click on the disc that has faulty sectors in Windows and choose “Repair.” Then pick Properties > Tools > Check from the context menu. Choosing the “Check” button will begin an error-checking scan of the drive, and the results will be shown to you thereafter. Scan and correct any problematic areas that the programmed

data recovery center

identifies before moving on.

When it comes to Macs, the approach is almost same. In Finder, go to Go > Utilities > Disk Utility and then Select the drive you want to check out.  Disk Utility will inform you what was fixed and if there are any more steps that need to be followed if there is a problem with the drive.

You may also like

Leave a Comment