Assuming that you found the Netgear router as the best suitable router for your home network, you need to start working on its setup process. This can be fulfilled using the Netgear Nighthawk app or the online setup wizard. Read this guide to gain knowledge about the Netgear router setup and installation process using the app and the setup wizard in detail.
Setup using the Netgear Nighthawk app
With the Nighthawk app in your possession, you can easily set up, control and manage the home network. Let us look at the steps below to have an idea about the router setup using the Netgear Nighthawk app:
- Firstly, download the Nighthawk app on your smartphone.
- Now, Attach the antennas available and connect the modem to the router’s internet port.
- After powering on the router, wait for the Wifi LED to light up.
- Look for the default credentials like SSID and password on the router’s label. These are generally present on the back or bottom of the router.
- You can tap on the Settings and then on the Wifi on your mobile device.
- Connect the device to the network which is listed on the router’s label and input the password.
- Launch the Netgear Nighthawk app on a mobile device to install the router and connect to the internet.
Setup using the Netgear router’s web interface
You can also use the internal online setup wizard to perform the Netgear router setup and installation process. Have a look at the brief steps given below for the same:
- Connect the devices using an ethernet cable.
- You can now press the power button on the router. The LEDs will light up on the router.
- Open any compatible browser now and input the default gateway routerlogin.net.
- You can log in to the router now using the default credentials. Remember that the passwords are case-sensitive.
- After answering the security questions you can click on Next.
- Give the Print this command if you wish to print the network settings and then click on Next.
- The Firmware update assistant will be displayed and then you can click Ok. The router is set up now.
- If the firmware updates are available, you can update the router and the router will reboot.
- Lastly, you will be prompted to log in. Enter the details and the router is set up finally.
Troubleshooting steps for the failed Netgear router setup
In case you are facing issues in setting up the Netgear router using the app or the web-based facility, read the troubleshooting tips given below for the same:
- Firstly, disconnect the Netgear router from the modem if you were already connected.
- You can try to reboot the modem just before connecting it to your router.
- Try to use a wired connection. Hence, connect the modem to the router with the help of the ethernet cable after the modem reboots.
- You can try to install the Netgear router again using the Nighthawk app.
- Make sure that the credentials are correct when you enter them while accessing the setup wizard for the router.
- In the end, if everything fails just reset the router and reconfigure it.
Conclusion
`You can perform the Netgear router setup and installation using the above-mentioned steps. Still, if you have any queries, call our experts in the end.
